Key Features of the VC20 Floor Scrubber:
✅ Cordless Freedom & Superior Maneuverability
Powered by long-lasting batteries, the VC20 moves smoothly and flexibly without the hassle of cords or outlets. Clean large areas without interruptions!
✅ Intuitive Controls for Effortless Operation
Smart LED Button Switch (red/green lights) with pictographic function icons—easy to understand, even for first-time users.
Minimal training required, reducing labor costs and downtime.
✅ Leak-Proof Water Supply System
Equipped with a solenoid valve to prevent water leakage, ensuring consistent performance and no wasted cleaning solution.
✅ Effortless Brush & Squeegee Adjustment
Dual-lever control for quick raising/lowering of brushes and squeegees—no bending or manual adjustments needed.
Automatic squeegee uncoupling protects the unit if accidentally impacted, preventing damage.
✅ Large-Capacity Tanks for Uninterrupted Cleaning
High-volume solution tank fills quickly, reducing refill downtime.
Efficient filtration system prevents water from entering the vacuum motor, ensuring longer motor life.
✅ Durable, Low-Maintenance Design
PU-reinforced drive wheels resist corrosion and wear, extending lifespan.
Brush-type water-retaining skirt (instead of traditional rubber) for easier handling, anti-aging, and longer use.
Removable squeegee system—install or replace in seconds with no hassle.
✅ Enhanced Visibility & Easy Maintenance
Transparent brush cover window allows for quick visual inspection.
Fast brush installation/removal—saving time on maintenance.
✅ Quiet & Energy-Efficient Operation
Optimized silencer technology reduces noise for a more comfortable work environment.
ECO mode extends battery life while minimizing power consumption and noise.
How to Use the Dycon VC20 Industrial Scrubber for Post-Renovation Cleaning
After a home renovation, floors are often covered in dust, paint splatters, adhesive residues, and construction debris. The Dycon VC20 Industrial Scrubber is the perfect machine for fast, thorough, and dust-free cleaning. Here’s a step-by-step guide to using it effectively.
Step 1: Pre-Cleaning Preparation
① Remove Large Debris
Sweep or vacuum loose nails, glass shards, and chunks of drywall to prevent scratch damage to the scrubber’s brush.
Use a putty knife to scrape off dried paint or glue (avoid metal scrapers on delicate floors).
② Pre-Treat Stubborn Stains
Dust & Powder Residues: Lightly mist with water to prevent airborne dust when scrubbing.
Paint & Adhesive Stains: Apply a neutral pH cleaner (avoid acids/alkalis) and let sit for 3-5 minutes before scrubbing.
Sticky Tape Residue: Use a citrus-based adhesive remover for safe dissolving.
Step 2: VC20 Setup for Renovation Cleaning
① Attach the Right Brush
Hard Bristle Brush → Best for tile, concrete, and epoxy floors (aggressive scrubbing).
Soft Brush → For finished wood or polished stone (gentler clean).
② Adjust Squeegee & Water Flow
Set the squeegee angle for maximum water recovery (prevents streaks).
Fill the clean water tank with warm water + renovation-grade cleaner (follow dilution ratios).
Install a fine filter in the dirty water tank to trap fine dust.
Step 3: Cleaning Process
① First Pass – Deep Scrub (Power Mode)
Move in slow, overlapping "S" patterns to loosen grime.
Focus on high-traffic areas & corners (adjust brush pressure if needed).
For wall edges, tilt the machine slightly to reach baseboards.
② Immediate Water Recovery
Check the transparent squeegee window to ensure no dirty water remains.
Empty the dirty water tank frequently (construction debris fills it quickly).
③ Second Pass – Rinse (ECO Mode)
Refill with clean water only.
Switch to soft brush & ECO mode for a final polish.
Step 4: Post-Cleaning Maintenance
① Machine Care
Rinse brushes & tanks immediately (dried concrete dust can clog the system).
Inspect filters and clean/replace if clogged.
② Floor Drying & Protection
Use a microfiber mop to dry floors (prevents water marks on sensitive surfaces).
For porous stone/tile, apply a sealer after cleaning.
Why VC20 is Perfect for Post-Renovation Cleaning?
✔ Dust-Free Cleaning – Sealed suction prevents dust clouds (unlike brooms).
✔ Stain Removal Power – Adjustable brush pressure tackles paint, glue, and grout haze.
✔ Reaches Every Corner – Maneuverable design cleans under cabinets & tight edges.
✔ Saves Time & Labor – Cleans 3x faster than manual mopping.
Pro Tips
⚠ Avoid using on freshly sealed floors (wait 72 hours).
Product Tags:
|
|
Eco Friendly Commercial Floor Cleaning Machines With 40L Solution Tank Images
|
